0 €0.00
Active filters
Hoe| | milling machine Sail Cutter U540/1 M - width 180cm - weight 375kg
| hoe | milling machine Sail Cutter U540/1 M - width 180cm - weight 375kg Working depth 24 cm
Working width: 180 cm
Number of rotors 4
Number of hoes 24
Weight: 375 kg
Required power: 40 kW / 55 hp
Working width: 180 cm
Number of rotors 4
Number of hoes 24
Weight: 375 kg
Required power: 40 kW / 55 hp
Potato digger or onions, with side discharge and rear discharge
Potato diggers or single-ribbon onions.
For tractors from 25 Hp upwards.
Dimensions: Length 235 cm - Width 110 cm - height 124 cm; weight 250 kg
Able to work on 6% slope terrain.
Suitable for soils of medium humidity, with weeds and stones.
Adjustable working depth on the wheels
Potatoes are dug and pulled out of the front blades, sent to the tape that will sift them, then the earth is crumbled and dropped as the potatoes are transferred to the back of the machine.
Item of our production (no Chinese)
Potato diggers Faza mod. SP 50
Side discharge potato diggers brand Faza sp50 model, for tractors of 15/35 Hp, width 60/24, groove depth 15/35, weight 250Kg.
Vibrating potato digger with rear exhaust
Universal three-point attachment For all tractors. The vibrating plomer conveys the potatoes separating them from the ground. From the third point of the tractor you can adjust the working depth. Suitable for both flat and slightly sloping terrain. Weight 135 kg Working depth 20 cm HP 10
| hoe Hydraulic displacement milling machine Vega - width 180 cm - weight 550 kg
Working depth: 12 cm
Working width: 180 cm
Number of rotors 6
Number of hoes 36
Weight: 550 kg
Required power: 33 kW / 45 hp
Working width: 180 cm
Number of rotors 6
Number of hoes 36
Weight: 550 kg
Required power: 33 kW / 45 hp
| hoe | Cutter Milling machine model 1.6 STRUMYK - weight 345kg - working width 160cm with cardan
Working Width: 160cm
Working Depth: 12cm
number of clubs 42
rotors 7
The milling machine is equipped with a gimbal shaft
Working Depth: 12cm
number of clubs 42
rotors 7
The milling machine is equipped with a gimbal shaft
| hoe | Cutter Milling machine model STRUMYK 1.4 - weight 320kg - working width 140cm
Working Width: 140cm
Working Depth: 12cm
number of hoes: 36
rotors 6
The milling machine is equipped with a gimbal shaft
Working Depth: 12cm
number of hoes: 36
rotors 6
The milling machine is equipped with a gimbal shaft
| hoe | milling machine Cutter model STRUMYK 2.0 - weight 400kg - working width 200cm
Working Width: 200cm
Working depth: 120mm
number of hoes: 54
rotors 8
The hoeing machine is equipped with cardan
Working depth: 120mm
number of hoes: 54
rotors 8
The hoeing machine is equipped with cardan
| hoe | milling machine Heavy Volans cutter - hydraulic - working width from 220 cm to 300 cm - weight from 800 to 1000 kg
Working depth: 12 cm
Working width: from 220 cm to 300 cm
Number of rotors from 10 to 14
Number of hoes: from 60 to 84
Weight: from 800 kg to 1000 kg
Required power: from 66 kW to 124 kW / from 90 hp to 170 hp
Working width: from 220 cm to 300 cm
Number of rotors from 10 to 14
Number of hoes: from 60 to 84
Weight: from 800 kg to 1000 kg
Required power: from 66 kW to 124 kW / from 90 hp to 170 hp
| hoe | milling machine Hydraulic Virgo cutter - working width from 120 to 200 cm - weight from 440 to 525 kg
Working depth: 12 cm
Working width: from 120 cm to 200 cm
Number of rotors : from 6 to 9
Number of Hoes from 36 to 54
Weight: from 440 kg to 525 kg
Required power: from 30 kW to 55 kW / from 41 hp to 75 hp
Working width: from 120 cm to 200 cm
Number of rotors : from 6 to 9
Number of Hoes from 36 to 54
Weight: from 440 kg to 525 kg
Required power: from 30 kW to 55 kW / from 41 hp to 75 hp